This is a brand new aFe (Advanced Flow Engineering) Air Intake System. We are an Authorized Dealer of aFe and carry the full line of products. The aFe Stage 2 sealed cold air intake produces up to 28 HP and up to 54 lbs. Torque while out flowing the factory intake by up to 41%.
Fully sealed in a durable commercial grade designed rotomolded air box, this air intake system features a 5-1/2 Pro-GUARD 7 washable/reusable, high filtration conical air filter that provides maximum filtration (99.7% efficient) with increased air flow. This intake system features a heat-insulating molded plastic intake tube and a unique turbo adaptor that funnels air into the turbo for improved volumetric efficiency and maximum performance while lowering Intake Air Temps I. In addition, this system features an innovative Dynamic Air Scoop D. Over the battery that efficiently channels additional air from the front grille into the air box reducing air intake temperatures by 25 degrees over the factory intake. The pre-oiled Pro-GUARD 7 performance air filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.
Utilizing factory mounting points, this system is easy to assemble and easy to install. Fully Sealed Design aFe engineers have designed a very sophisticated 2-piece sealed intake housing that keeps out warm underhood air and brings in cooler, outside air for a denser intake charge. 5-1/2 360 Degree Air Filter A cone 360 degree round air filter is used for maximum air flow and filtration (99.7% efficient).
The patented Pro-GUARD 7 performance air filter features 5-layers of progressive cotton gauze and 2-layers of synthetic media and is constructed with 100% polyurethane for long life and multiple cleaning cycles. Hassle-Free Installation aFe has developed this intake to provide a hassle-free installation that utilizes all factory mounting locations. This intake is 50-state legal CARB E. 08-'10 Ford Super Duty Powerstroke 6.4L Diesel.Part #: 75-81265 aFe Pro Guard 7 Filtration Stage 2 Si w/ Scoop Gain 28 HP & 54 lbs x ft. AFe Air Intake Systems (AIS) provide your vehicle the air it needs by replacing the restrictive factory intake system with a high flow conical air filter, and providing isolation from the hot engine air. AFe offers two types of Air Intake System kits. Stage One kits replace the factory air box with a housing and conical filter. Typical install time is 15-45 minutes. You can expect improved throttle response and/or greater efficiency. Stage Two kits replace the entire intake box, filter and tube. By providing the fresh, cold air all the way to the turbo or throttle body, aFes Stage Two systems will boost engine performance by up to 50HP and 114 Ft.
You can expect greatly improved throttle response, and/or greater efficiency. Typical install time is 60-90 minutes. AFe cold air induction kits are available in 3 types of filter media, Pro Dry S, Pro 5R (Standard), and Pro-Guard 7. Any aFe cold air induction kit can utilize another media type by simply purchasing another filter.
The Pro-Guard 7 filters by aFe are the only washable/reusable air filter that stops dirt as well as an OEM paper filter. This filter media is constructed of 5 layers of progressively finer medical grade cotton gauze and 2 layers of non-woven synthetic polyester fabric with a random porosity.
These media layers are sandwiched between two layers of aluminum wire mesh and expanded metal which provides a lifetime structural skeleton for the filter and prevents collapse in high flowing diesel apllications. The result is high performance airflow with filtration efficiency of a heavy-duty filter. This filtration media is so unique, it was granted US patent 6,811,588.
When you use your vehicle in a severe duty or work application, it is important to give the engine a high level of protection from dirt and dust. With 7 layers of media, aFe's Pro-GUARD 7 is able to offer a level of protection to the engine that is unsurpassed by any washable/reusable filter available today. Even fine dust is effectively filtered out and kept from entering the engine. When the vehicle needs to make it through the long haul, Pro-GUARD 7 will offer the protection you need.
AFe Pro-Guard 7 Air Intake Features. Manufactured and assembled in the USA. Media Type: Progressive 5 layer cotton gauze + 2 layer synthetic poly.
Air Flow: Up to 35% increase over stock. Filtration Protection: Maximum Protection, 99.7%. Maintenance: Clean with aFe Power Cleaner, allow to dry, oil with aFe Oiling Agent. Service Interval: 50,000 miles normal driving; 25,000 miles in severe dust environments. The item "AFe Power Si Air Intake Scoop For 08-10 Ford SuperDuty Powerstroke 6.4L Diesel" is in sale since Tuesday, June 27, 2017.
This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Air Intake Systems". The seller is "azoffroadperformance" and is located in Phoenix, Arizona. This item can be shipped worldwide.